May ngôi nhà bánh gừng từ vải dạ (sưu tầm)
We need something for this project:
– Felt soft primary colors brown and white, plus some other colors for small items;
– Pattern;
– Sintepon;
– The cutting tools: scissors, shears, knife, pencils, crayons;
– Thread for sewing;
– Needles and pins;
– sewing machine;
– X / cotton fabric for lining;
– Line;
– A long needle (or something instead);
– Beads;
– Floss;
– Lace, beads, buttons, etc. for decoration.
Well prepared, we proceed!
To begin with, we need pattern. My favorite tea is very small: 18 cm in length, 11 cm in height and shirinu.Ya drew the pattern on the basis that the spout and the handle will be located inside the diagonal.
Below given me constructed pattern, which I repeated to you on your computer. It can print on a printer or to redraw on the squares (square side is 1 cm). If your mate tea is very different from my size, you have a pattern that increase (or decrease) your own.
Be clear on the pattern, making no indentation, cut out parts of syntepon house. I had sintepon about 5 mm in thickness, quite dense, but soft.Therefore, the house wall (Details follow a pattern №1 and №2) I cut 4 pcs. each to make them thicker. Roof (№3 – is half the roof, on the dotted line passes fold tissue) is cut in a single layer.
Through edge seam with nakida connect two Circuits. Along the lower edge of the stitching is optional. As a result, there are now four rather thick walls. The basis of it is warmer ready!
Now all felt! We cut out every detail in 2 copies with margins for the seams. I had small pieces of felt, so the entire roof they are not fit. I carve two halves, which are then sew. Padding on the seam shown in the picture. Below the walls of the stock is greater than 5 cm, in fact all that was to the edge of a piece of felt I left, not cut.
We begin to sew the wall. I wanted to do an imitation brevnyshek. Here we need a machine in hand, this effect is not repeated. Sinteponovye have felt over the wall, with all seam allowance. Wrote virtually the edge syntepon. Then turn over. Between felt and synthetic padding already made close to the seam We thrust a long needle, skewer or have a thin brush. And make another suture approximately 2 cm after the first.
Repeat these steps several times. At the very end, when the place is only two a log, we fix needle pins. Overturn wall Fold the edge of the remainder felt inside, and scribbling on a typewriter on the wrong side: so while the last two are a log and processed by the lower edge of the wall.
On the facades of the building we are doing nearly as well. Facade conventionally composed of two parts: a rectangular bottom and top of the triangle. The first seam fixing sintepon to make felt the line between the triangle and the rectangle, then the problem is reduced to already solved, zastrachivaem rectangle a log down as previously reported with the side wall of the house. Then we return to the upper – triangular part of the facade. Fix a pin felt padding polyester. Zastrachivaem triangle without using needles. He received less than a relief, but it is a small area, and the eye is strongly will not rush.
In the photo above the total of all of our manipulations with the face and reverse side.
Getting to connect stenochki house. Fold wall facade with right sides anchoring bulavochkami, sostrachivaem typed retreated about 3-5 mm from syntepon. I had to change the presser foot to foot on the machine to stitch the zipper. If this is not possible, it is possible to sew and in their hands.
At the top of the photo shows what an excellent seal is obtained. And due to the fact that we just sewed felt, departing from syntepon, you can safely fold structure at this point.
Sew pairs facade to the wall twice. And at this stop. We will work with the halves of the house. Sew them more convenient details on this “flat” stage. Edge felt rotten inside out and fix on pins sintepon to us they do not interfere, and could see the correct area of the house, which will perfectly position the windows and doors.
Before turning to the details, we recall the important part of the roof of the house. So I cut out the felt side of two parts, to start sostrochim them on a typewriter. Then we have sinteponovye part of the roof on the felt, aligning their sredimy. We fix all the pins. Make cuts on the corners, and carefully wrap angle sinteponovye felt. And again- pins to help! Through edge sew the felt to the batting. Sintepon rather thick, it can reliably catch him felt and not get out the front of the thread. Do not pierce right through!
When the bulk of the work is done, and the coverings of the bearing part of the house are ready, move on to my most favorite part of any creative process – creating details!
The first door on the queue. Cut the dark brown felt piece on the pattern number 5. Light string and regular stitches embroider on the access door of the cracks between the boards. From beads turns the handle. Sew on the door to the center of one of the walls. This is done by small stitches over the edge. The tip of the needle is derived from the “thickness” of the door, and a little stuck under the door – so the seam is obtained almost invisible.
According to the pattern cut out the light №4 felt window. From the dark pieces of felt cut a rectangle slightly larger hole in the window frame.Of the pieces of lace making zanovesochki. Plat I decorated with lace and beads. The two parts of the window are sewn together on the inner contour of the frame.
Such windows it took me four.
Small stitches are sewn over the edge of the windows to the walls. The inside of the box, you can deepen, sew around the perimeter through the dark thread.
Now turn detalek to decorate our house. Small circles of felt together hides, sewing sewn in a circle through the center. From lace tails do for our sweeties, because we get it it!
Another version of the candy twists of the two (three, four, etc.) slips of colored felt. To consolidate the results, “Snail” is pierced with a needle several times through. You can leave a colorful snail, decorate with beads or lace, with a long braid to make a lollipop.
And this is done biscuits
I think this master class, as no other, I have finally issued its nature slastёny. Your attention – donuts …
Pretzel …
And fashionable macaroon!
From floss make bicolor lace (in fact, it is a red and white candy, but nobody knows about it). Two rather long thread to cling to the middle, as shown in the top left photo. One end of the thread coupling tie to the handle of the cabinet, or ask someone to hold, only very, very hard, and the other end begins to twist in any convenient way. When it will seem that you can not twist the rope more. clamping finger middle, we put together the white and red pieces and let go! Miraculously, magic and physics we get a wonderful string!
To not get stuck in the sweet kingdom, let us return briefly to our lodge, return to its main parts, which time would have to be combined into one perfect whole.
Getting the job as follows: combine top of the facade, with the middle of the roof, stepping back from the roof edge 1.5 cm (conceived in such a way that the roof overhangs the walls, the wall length of 16 cm, while the roof 19. 19-16 = 3; 3: 2 = 1.5 these are not the cunning calculation).Strong thread sew facade to the roof. Needles we catch all the layers of the wall and felt, and sintepon under it (on the roof do not need to overdo it and do not get out on the front side), connect all the seam over the edge.
When he reached the corner, putting a second wall (already connected to the facade) to the underside of the roof overhang for the stock of a roof over the wall, he should get, we’re watching that line is not parallel to the left and left. Sew quite difficult since all the details very plump and repel each other. Therefore, approximately every 2 cm, I’m doing one stitch cross the previous one, ie, it’s this “ugly” picture seam on a specially made.
Just sew a second set of Front + wall to the roof.
It remains to make only two “gaps” on the sides. I remind you that to do so SERNAM, stitching felt only, departing from syntepon few millimeters.
The house is ready, left the final touches.
Our beautiful caramel sew lace on the roof bend and around the door. Make a small loop in the center, for it will be convenient to raise the house above ground, ie over the table to get the kettle. The other sweet elements decorate the facades and roof. Diluted felt snacks buttons and beads, which immediately take on the role of candies of all kinds and colors.
When all construction and externally decorative work has been completed, we proceed to the interior decoration. Remembering about the seamy side. Cut out on №1 and №2 of tissue that we have in store for lining the walls, making approximately 1 cm seam allowances. The inner side of the roof to cut out on the green office, pattern №3 *.
Sostrachivaem parts on the machine. Refill the duplicate house inside the felt. First we catch at the corners of the roof, then angles below and sews edge seam hiding like this: in the hidden needle felt, the fabric, and the result remains almost imperceptible seam.
That’s all!
It is necessary to place the house in the kitchen or in the living room, enjoy our work and drink your favorite tea 🙂
